Difference between revisions of "Accessories"

From Click Wiki
Jump to: navigation, search
(Created page with "{{DISPLAYTITLE:Accessories}} <translate> =Accessories= <!--T:2--> <!--T:3--> Click Scanners come with a fixed set of basic accessories and some extra accessories. ==Base Kit...")
(No difference)

Revision as of 15:20, 30 November 2016

Accessories

Click Scanners come with a fixed set of basic accessories and some extra accessories.

Base Kit

The Basic Kit comes with every scanner, inside a case, containing the Impression holder, 3 vestibular trays (small, standard and big) and the calibration kit.

Impression Holder

The Impression Holder is the main support on which it's possible to place impressions inside the scanner. If mounted on this support, the impressions are guaranteed to be in the best possible position for the scanner acquisition.

It's important to keep the impression holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.

300px

Vestibular Trays

Calibration Kit

The Calibration Kit is a planar surface with a pattern of circles, placed on a bended support.
Every calibration kit is measured and analized with high-precision machines.
The measurement is then saved on a xml file and every kit has it's own xml description file.
The kit is used to recalibrate the optical head of the scanner.

It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface, like scratches or dirt, can make the calibration system unreliable.

Calibration plate.jpg