Difference between revisions of "Options General/it"

From Click Wiki
Jump to: navigation, search
(Created page with "==Interfaccia==")
(Created page with "In questa sezione è possibile modificare la lingua del software. La lingua viene automaticamente impostata dal computer quindi, tranne casi rari, non dovrebbe essere necessar...")
Line 7: Line 7:
 
==Interfaccia==
 
==Interfaccia==
  
In this section it is possible to change the language of the software. The language is automatically set on the system language of the computer so, with the exceptions of rare cases, it shouldn't be necessary to change this setting.
+
In questa sezione è possibile modificare la lingua del software. La lingua viene automaticamente impostata dal computer quindi, tranne casi rari, non dovrebbe essere necessario modificare questo parametro.
  
 
==Export==
 
==Export==

Revision as of 09:48, 8 June 2017

Warning: Display title "General Options" overrides earlier display title "Opzioni Generali".

La sezione Opzioni Generali permette all'utente di modificare le impostazioni di base del software di scansione.

General.PNG

Interfaccia

In questa sezione è possibile modificare la lingua del software. La lingua viene automaticamente impostata dal computer quindi, tranne casi rari, non dovrebbe essere necessario modificare questo parametro.

Export

This section allows to choose a folder in which the files will be saved.
It is also possible to choose the format for the output files from the provided menu. The files are exported by default in .STL, but they can also be exported, for example, in .OBJ if the color information of the scan needs to be preserved.

User Info

In this section the user can provide some general and contact information that we strongly suggest to provide because in case of software error an automated error report will be sent to our support department, and will allow us to contact the user as soon and effectively as possible.

Scanner

This section regulates the scanner hardware settings

Auto Adjust Projector Light

If active, this options allows the software to automatically adjust the light intensity of the projector based on the texture of the inserted impression. It is advised to check this option to guarantee the best possible scanning performances.

Post Acquisition Alignment

This option performs all alignemts on the image after the scanning process is finished; it can be considered as a safety check for possible wrong superpositions of the views of the impression.

Restart Scanner Configuration

This button allows to start over with the First Software Configuration as seen in the previous pages.
This procedure can be run if the customer wants to recalibrate, set another scanner on the same computer or change the scanning hight.

Advanced Settings

Allows the access to advanced settings

Once all modifications are performed it is possible to click

  • Reset to Default, if the user wants to restore the settings to default mode;
  • Cancel, to discard all changes;
  • Ok, to accept the changes and close.
Dental 2 5 wiz prev.png 120px-Homebutton.png Dental 2 5 wiz next.png